# -*- coding: utf-8 -*-
import math
import enum

from ._brotli import ffi, lib


class Error(Exception):
    """
    Raised whenever an error is encountered with compressing or decompressing
    data using brotlipy.

    .. versionadded:: 0.5.1
    """
    pass


#: An alias of :class:`Error <brotli.Error>` that exists for compatibility with
#: the original C brotli module.
#:
#: .. versionadded: 0.5.1
error = Error


class BrotliEncoderMode(enum.IntEnum):
    """
    Compression modes for the Brotli encoder.

    .. versionadded:: 0.5.0
    """
    #: Default compression mode. The compressor does not know anything in
    #: advance about the properties of the input.
    GENERIC = lib.BROTLI_MODE_GENERIC

    #: Compression mode for UTF-8 format text input.
    TEXT = lib.BROTLI_MODE_TEXT

    #: Compression mode used in WOFF 2.0
    FONT = lib.BROTLI_MODE_FONT


# Define some names for compatibility with the C module.

#: The default compression mode for brotli.
DEFAULT_MODE = BrotliEncoderMode(lib.BROTLI_DEFAULT_MODE)


#: A compression mode where the compressor does not know anything in advance
#: about the properties of the input.
#:
#: .. note:: This name is defined for compatibility with the Brotli C
#:           extension. If you're not interested in that compatibility, it is
#:           recommended that you use :class:`BrotliEncoderMode
#:           <brotli.BrotliEncoderMode>` instead.
#:
#: .. versionadded:: 0.5.0
MODE_GENERIC = BrotliEncoderMode.GENERIC


#: A compression mode for UTF-8 format text input.
#:
#: .. note:: This name is defined for compatibility with the Brotli C
#:           extension. If you're not interested in that compatibility, it is
#:           recommended that you use :class:`BrotliEncoderMode
#:           <brotli.BrotliEncoderMode>` instead.
#:
#: .. versionadded:: 0.5.0
MODE_TEXT = BrotliEncoderMode.TEXT


#: The compression mode used in WOFF 2.0.
#:
#: .. note:: This name is defined for compatibility with the Brotli C
#:           extension. If you're not interested in that compatibility, it is
#:           recommended that you use :class:`BrotliEncoderMode
#:           <brotli.BrotliEncoderMode>` instead.
#:
#: .. versionadded:: 0.5.0
MODE_FONT = BrotliEncoderMode.FONT


def decompress(data):
    """
    Decompress a complete Brotli-compressed string.

    :param data: A bytestring containing Brotli-compressed data.
    """
    d = Decompressor()
    data = d.decompress(data)
    d.finish()
    return data


def compress(data,
             mode=DEFAULT_MODE,
             quality=lib.BROTLI_DEFAULT_QUALITY,
             lgwin=lib.BROTLI_DEFAULT_WINDOW,
             lgblock=0,
             dictionary=b''):
    """
    Compress a string using Brotli.

    .. versionchanged:: 0.5.0
       Added ``mode``, ``quality``, `lgwin``, ``lgblock``, and ``dictionary``
       parameters.

    :param data: A bytestring containing the data to compress.
    :type data: ``bytes``

    :param mode: The encoder mode.
    :type mode: :class:`BrotliEncoderMode` or ``int``

    :param quality: Controls the compression-speed vs compression-density
        tradeoffs. The higher the quality, the slower the compression. The
        range of this value is 0 to 11.
    :type quality: ``int``

    :param lgwin: The base-2 logarithm of the sliding window size. The range of
        this value is 10 to 24.
    :type lgwin: ``int``

    :param lgblock: The base-2 logarithm of the maximum input block size. The
        range of this value is 16 to 24. If set to 0, the value will be set
        based on ``quality``.
    :type lgblock: ``int``

    :param dictionary: A pre-set dictionary for LZ77. Please use this with
        caution: if a dictionary is used for compression, the same dictionary
        **must** be used for decompression!
    :type dictionary: ``bytes``

    :returns: The compressed bytestring.
    :rtype: ``bytes``
    """
    # This method uses private variables on the Compressor object, and
    # generally does a whole lot of stuff that's not supported by the public
    # API. The goal here is to minimise the number of allocations and copies
    # we have to do. Users should prefer this method over the Compressor if
    # they know they have single-shot data.
    compressor = Compressor(
        mode=mode,
        quality=quality,
        lgwin=lgwin,
        lgblock=lgblock,
        dictionary=dictionary
    )
    compressed_data = compressor._compress(data, lib.BROTLI_OPERATION_FINISH)
    assert lib.BrotliEncoderIsFinished(compressor._encoder) == lib.BROTLI_TRUE
    assert (
        lib.BrotliEncoderHasMoreOutput(compressor._encoder) == lib.BROTLI_FALSE
    )
    return compressed_data


def _validate_mode(val):
    """
    Validate that the mode is valid.
    """
    try:
        val = BrotliEncoderMode(val)
    except ValueError:
        raise Error("%s is not a valid encoder mode" % val)


def _validate_quality(val):
    """
    Validate that the quality setting is valid.
    """
    if not (0 <= val <= 11):
        raise Error(
            "%d is not a valid quality, must be between 0 and 11" % val
        )


def _validate_lgwin(val):
    """
    Validate that the lgwin setting is valid.
    """
    if not (10 <= val <= 24):
        raise Error("%d is not a valid lgwin, must be between 10 and 24" % val)


def _validate_lgblock(val):
    """
    Validate that the lgblock setting is valid.
    """
    if (val != 0) and not (16 <= val <= 24):
        raise Error(
            "%d is not a valid lgblock, must be either 0 or between 16 and 24"
            % val
        )


def _set_parameter(encoder, parameter, parameter_name, val):
    """
    This helper function sets a specific Brotli encoder parameter, checking
    the return code and raising :class:`Error <brotli.Error>` if it is
    invalid.
    """
    rc = lib.BrotliEncoderSetParameter(encoder, parameter, val)

    if parameter == lib.BROTLI_PARAM_MODE:
        _validate_mode(val)
    elif parameter == lib.BROTLI_PARAM_QUALITY:
        _validate_quality(val)
    elif parameter == lib.BROTLI_PARAM_LGWIN:
        _validate_lgwin(val)
    elif parameter == lib.BROTLI_PARAM_LGBLOCK:
        _validate_lgblock(val)
    else:  # pragma: no cover
        raise RuntimeError("Unexpected parameter!")

    # This block is defensive: I see no way to hit it, but as long as the
    # function returns a value we can live in hope that the brotli folks will
    # enforce their own constraints.
    if rc != lib.BROTLI_TRUE:  # pragma: no cover
        raise Error(
            "Error setting parameter %s: %d" % (parameter_name, val)
        )


class Compressor(object):
    """
    An object that allows for streaming compression of data using the Brotli
    compression algorithm.

    .. versionadded:: 0.5.0

    :param mode: The encoder mode.
    :type mode: :class:`BrotliEncoderMode` or ``int``

    :param quality: Controls the compression-speed vs compression-density
        tradeoffs. The higher the quality, the slower the compression. The
        range of this value is 0 to 11.
    :type quality: ``int``

    :param lgwin: The base-2 logarithm of the sliding window size. The range of
        this value is 10 to 24.
    :type lgwin: ``int``

    :param lgblock: The base-2 logarithm of the maximum input block size. The
        range of this value is 16 to 24. If set to 0, the value will be set
        based on ``quality``.
    :type lgblock: ``int``

    :param dictionary: A pre-set dictionary for LZ77. Please use this with
        caution: if a dictionary is used for compression, the same dictionary
        **must** be used for decompression!
    :type dictionary: ``bytes``
    """
    _dictionary = None
    _dictionary_size = None

    def __init__(self,
                 mode=DEFAULT_MODE,
                 quality=lib.BROTLI_DEFAULT_QUALITY,
                 lgwin=lib.BROTLI_DEFAULT_WINDOW,
                 lgblock=0,
                 dictionary=b''):
        enc = lib.BrotliEncoderCreateInstance(
            ffi.NULL, ffi.NULL, ffi.NULL
        )
        if not enc:  # pragma: no cover
            raise RuntimeError("Unable to allocate Brotli encoder!")

        enc = ffi.gc(enc, lib.BrotliEncoderDestroyInstance)

        # Configure the encoder appropriately.
        _set_parameter(enc, lib.BROTLI_PARAM_MODE, "mode", mode)
        _set_parameter(enc, lib.BROTLI_PARAM_QUALITY, "quality", quality)
        _set_parameter(enc, lib.BROTLI_PARAM_LGWIN, "lgwin", lgwin)
        _set_parameter(enc, lib.BROTLI_PARAM_LGBLOCK, "lgblock", lgblock)

        if dictionary:
            self._dictionary = ffi.new("uint8_t []", dictionary)
            self._dictionary_size = len(dictionary)
            lib.BrotliEncoderSetCustomDictionary(
                enc, self._dictionary_size, self._dictionary
            )

        self._encoder = enc

    def _compress(self, data, operation):
        """
        This private method compresses some data in a given mode. This is used
        because almost all of the code uses the exact same setup. It wouldn't
        have to, but it doesn't hurt at all.
        """
        # The 'algorithm' for working out how big to make this buffer is from
        # the Brotli source code, brotlimodule.cc.
        original_output_size = int(
            math.ceil(len(data) + (len(data) >> 2) + 10240)
        )
        available_out = ffi.new("size_t *")
        available_out[0] = original_output_size
        output_buffer = ffi.new("uint8_t []", available_out[0])
        ptr_to_output_buffer = ffi.new("uint8_t **", output_buffer)
        input_size = ffi.new("size_t *", len(data))
        input_buffer = ffi.new("uint8_t []", data)
        ptr_to_input_buffer = ffi.new("uint8_t **", input_buffer)

        rc = lib.BrotliEncoderCompressStream(
            self._encoder,
            operation,
            input_size,
            ptr_to_input_buffer,
            available_out,
            ptr_to_output_buffer,
            ffi.NULL
        )
        if rc != lib.BROTLI_TRUE:  # pragma: no cover
            raise Error("Error encountered compressing data.")

        assert not input_size[0]

        size_of_output = original_output_size - available_out[0]
        return ffi.buffer(output_buffer, size_of_output)[:]

    def compress(self, data):
        """
        Incrementally compress more data.

        :param data: A bytestring containing data to compress.
        :returns: A bytestring containing some compressed data. May return the
            empty bytestring if not enough data has been inserted into the
            compressor to create the output yet.
        """
        return self._compress(data, lib.BROTLI_OPERATION_PROCESS)

    def flush(self):
        """
        Flush the compressor. This will emit the remaining output data, but
        will not destroy the compressor. It can be used, for example, to ensure
        that given chunks of content will decompress immediately.
        """
        chunks = []
        chunks.append(self._compress(b'', lib.BROTLI_OPERATION_FLUSH))

        while lib.BrotliEncoderHasMoreOutput(self._encoder) == lib.BROTLI_TRUE:
            chunks.append(self._compress(b'', lib.BROTLI_OPERATION_FLUSH))

        return b''.join(chunks)

    def finish(self):
        """
        Finish the compressor. This will emit the remaining output data and
        transition the compressor to a completed state. The compressor cannot
        be used again after this point, and must be replaced.
        """
        chunks = []
        while lib.BrotliEncoderIsFinished(self._encoder) == lib.BROTLI_FALSE:
            chunks.append(self._compress(b'', lib.BROTLI_OPERATION_FINISH))

        return b''.join(chunks)


class Decompressor(object):
    """
    An object that allows for streaming decompression of Brotli-compressed
    data.

    .. versionchanged:: 0.5.0
       Added ``dictionary`` parameter.

    :param dictionary: A pre-set dictionary for LZ77. Please use this with
        caution: if a dictionary is used for compression, the same dictionary
        **must** be used for decompression!
    :type dictionary: ``bytes``
    """
    _dictionary = None
    _dictionary_size = None

    def __init__(self, dictionary=b''):
        dec = lib.BrotliDecoderCreateInstance(ffi.NULL, ffi.NULL, ffi.NULL)
        self._decoder = ffi.gc(dec, lib.BrotliDecoderDestroyInstance)

        if dictionary:
            self._dictionary = ffi.new("uint8_t []", dictionary)
            self._dictionary_size = len(dictionary)
            lib.BrotliDecoderSetCustomDictionary(
                self._decoder,
                self._dictionary_size,
                self._dictionary
            )

    def decompress(self, data):
        """
        Decompress part of a complete Brotli-compressed string.

        :param data: A bytestring containing Brotli-compressed data.
        :returns: A bytestring containing the decompressed data.
        """
        chunks = []

        available_in = ffi.new("size_t *", len(data))
        in_buffer = ffi.new("uint8_t[]", data)
        next_in = ffi.new("uint8_t **", in_buffer)

        while True:
            # Allocate a buffer that's hopefully overlarge, but if it's not we
            # don't mind: we'll spin around again.
            buffer_size = 5 * len(data)
            available_out = ffi.new("size_t *", buffer_size)
            out_buffer = ffi.new("uint8_t[]", buffer_size)
            next_out = ffi.new("uint8_t **", out_buffer)

            rc = lib.BrotliDecoderDecompressStream(self._decoder,
                                                   available_in,
                                                   next_in,
                                                   available_out,
                                                   next_out,
                                                   ffi.NULL)

            # First, check for errors.
            if rc == lib.BROTLI_DECODER_RESULT_ERROR:
                error_code = lib.BrotliDecoderGetErrorCode(self._decoder)
                error_message = lib.BrotliDecoderErrorString(error_code)
                raise Error(
                    "Decompression error: %s" % ffi.string(error_message)
                )

            # Next, copy the result out.
            chunk = ffi.buffer(out_buffer, buffer_size - available_out[0])[:]
            chunks.append(chunk)

            if rc == lib.BROTLI_DECODER_RESULT_NEEDS_MORE_INPUT:
                assert available_in[0] == 0
                break
            elif rc == lib.BROTLI_DECODER_RESULT_SUCCESS:
                break
            else:
                # It's cool if we need more output, we just loop again.
                assert rc == lib.BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT

        return b''.join(chunks)

    def flush(self):
        """
        Complete the decompression, return whatever data is remaining to be
        decompressed.

        .. deprecated:: 0.4.0

            This method is no longer required, as decompress() will now
            decompress eagerly.

        :returns: A bytestring containing the remaining decompressed data.
        """
        return b''

    def finish(self):
        """
        Finish the decompressor. As the decompressor decompresses eagerly, this
        will never actually emit any data. However, it will potentially throw
        errors if a truncated or damaged data stream has been used.

        Note that, once this method is called, the decompressor is no longer
        safe for further use and must be thrown away.
        """
        assert (
            lib.BrotliDecoderHasMoreOutput(self._decoder) == lib.BROTLI_FALSE
        )
        if lib.BrotliDecoderIsFinished(self._decoder) == lib.BROTLI_FALSE:
            raise Error("Decompression error: incomplete compressed stream.")

        return b''